_AlertIE

Ideal Networks | UniPRO MGig 1

Ethernet traffic tester, RJ45, WAN & Metro

Ideal Networks
Reference : IDNUniProMGig1
Serie : UniPRO
Purchase Order Reference : UniPro MGig1
Brand : Ideal Networks
Testeur de traffic Ethernet, interface cuivre RJ45.
2 versions disponibles: mono ou bi-ports (voir les options). 

Pour les interventions de premier niveau.
Idéal pour les installateurs de liaisons FH ou de liaisons fixes, les sous-traitants, les professionnels de la maintenance des réseaux et les intégrateurs de systèmes. 
  • Interface cuivre RJ45 de 10/100/1000 Mb/s 
  • Affichage pré-configuré de chargement/mémorisation, avec les indications graphiques succès /échec. 
  • Bouton Autotest pour les séquences de tests. Peut être utilisé sans surveillance. 
  • Paramétrages indépendants du service et de la cible, pour garantir la bonne configuration de la liaison avant les tests et pour réduire significativement la durée d'essai et de recherche des erreurs. 
  • Tests RFC2544, BERT et service unique (Flux), test « SLA-Tick » et jusqu'à 3 VLAN imbriqués, y compris le Q-in-Q 
  • IPv4 et IPv6 simultanés, test PoE/PoE+, « Hub Blink », « Ping » et « Trace Route ». 
  • Test « Service Disruption Time (SDT) ». 
  • Génération de trafic pour service unique (flux). 
  • Test depuis une extrémité unique - permet l'envoi du trafic et la collecte des résultats en un seul endroit (en télécommandant les appareils UniPRO SEL1 ou UniPRO MGig1 placés l'extrémité distante pour le rebouclage). 
  • Existe aussi avec interface optique et tests bi-directionnels (voir les versions PLUS et PRO), fonctions MPLS et tests selon Y.1564 (NetSAM) (versions PRO uniquement).
    TTCHT
    Quantity
    Expédié sous 2 semaines
    Quick quote for this product
    Quick quote for this product
    Details

    UniPRO MGig1
    Carrier-grade Ethernet tester

    UniPRO SEL1
    Intelligent loopback device

    Designed for full Ethernet testing of carrier service turn-up. mobile backhaul link. microwave and wireless link and for enterprise users to monitor carriers’ SLA performance

    Typical Users

    Enterprise Users

    • Installation and maintenance subcontractors
    • Gas. electricity and water utilities. public sector. petrochemical
    • Ethernet installation. maintenance and SLA testing

    Telco Users

    • Telco. cable TV. broadband. WAN and metro Ethernet plus leased line service providers
    • Mobile network operators
    • Data centres

    Test Applications

    • WAN and metro Ethernet access copper and fibre service turn-up
    • Mobile backhaul installation and maintenance
    • Ethernet microwave link
    • Backhaul test for microcell base station and public access WiFi coverage
    • SLA policing
    • Ethernet is everywhere...

    Test Functions

    • One touch to run multiple tests – unattended
    • Y.1564 (NetSAM) and RFC2544
    • SLA-Tick (Service Level Agreement) and BERT
    • Multi service (stream) test
    • Simultaneous IPv4 and IPv6 support
    • QinQ. Multiple VLAN and MPLS

     

     

    Which UniPRO model is right for you?

    • UniPRO MGig1
      R152001
      - GbE transmission tester with single copper port (Solo)
      R152008 - GbE transmission tester with dual copper ports (Duo)
       
      Entry level model for first line users. Ideal for radio link installers. fixed link installers. subcontractors. network maintenance professionals and system integrators.
       
      UniPRO MGig1 PLUS
      R152002
      - GbE Multi stream Bi-Directional transmission tester with single copper and
      optical ports (Solo)
      R152009 - GbE Multi stream Bi-Directional transmission tester with dual copper and
      optical ports (Duo)
       
      Ideal for skilled engineers who want the ability to augment pre-configured and auto sequence tests with the ability to dig deeper into the troubleshooting of unsatisfactory test results - or who wish to do detailed manual testing.
       
      UniPRO MGig1 PRO
      R152003
      - GbE Multi stream Bi-Directional transmission tester with single copper and optical ports. MPLS and Y.1564 (Solo)
      R152010 - GbE Multi stream Bi-Directional transmission tester with dual copper and optical ports. MPLS and Y.1564 (Duo)
       
      Full ITU-T Y.1564 (NetSAM) multi service (stream) testing capability. Retains the simplicity of use. intuitive graphic interface and time saving pre-configured and single button auto sequence testing functions. Adds the independent target and service to cut troubleshooting time.
       
      UniPRO SEL1
      R154000
      - GbE loopback device with single copper and optical ports
       
      A self contained intelligent loopback device to accompany any of the UniPRO MGig1 units to enable loopback at the distant end of the link.
       
      Single or multiple UniPRO SEL1s can be fully remote controlled by the near end UniPRO MGig1 including the download of all the necessary operating parameters. Other than plugging it into the demarcation point at the far end. no further human intervention is needed.
       
      It can also be used as a manually controlled loopback unit for other manufacturers’ Ethernet testers.
       
      UniPRO SEL1 can be permanently connected to a spare switch port to enable unmanned loopback testing for network troubleshooting. The link under test is simply bridged to the UniPRO SEL1’s port using the switch’s remote management commands.
    Product Details
    41-Standard Manufacturer Warranty 1 YEAR
    132-Package includes 1 NiMH battery pack, 2 30cm RJ45 STP cables, 1 power supply, carrying hardcase, user manual on CD-ROM, quick guide
    35-Dimension (HxWxD) (mm) nc
    13-Net Weight nc
    Download Files
    By continuing browsing, you accept the use of cookies to offer you services and offers tailored to your interests, and measure the use of our services. Learn more about cookies.
    I accept