_AlertIE

Ideal Networks | UniPRO SEL 1

Intelligent Ethernet loopback device, for Ethernet traffic tester

Ideal Networks
Reference : IDNUniProSEL1
Serie : UniPRO, UniPRO Mgig 1
Purchase Order Reference : 154000
Brand : Ideal Networks
UniPRO SEL1 est un équipement autonome de rebouclage intelligent pour accompagner toutes les unités UniPRO MGig1, il permet d'activer le rebouclage depuis l'autre l'extrémité de la liaison.
Un ou plusieurs équipements UniPRO SEL1peuvent être entièrement télécommandés par l'UniPRO MGig1 situé à l'extrémité locale, y compris le téléchargement de tous les paramètres opérationnels nécessaires.
Hormis le raccordement de l'équipement au point de test à l'extrémité distante, aucune autre intervention humaine n'est nécessaire.
Il peut également être utilisé comme unité de rebouclage commandée manuellement, avec les testeurs Ethernet des autres fabricants.
Un appareil UniPRO SEL1peut être raccordé en permanence à un port d'un switch pour activer un test de rebouclage sans intervention humaine lors du dépannage du réseau. La liaison à tester est simplement reliée au port de l'UniPRO SEL1à l'aide des commandes de gestion à distance du switch.
TTCHT
Quantity
Expédié sous 2 semaines
Quick quote for this product
Quick quote for this product
Details

UniPRO MGig1
Carrier-grade Ethernet tester

UniPRO SEL1
Intelligent loopback device

Designed for full Ethernet testing of carrier service turn-up. mobile backhaul link. microwave and wireless link and for enterprise users to monitor carriers’ SLA performance

Typical Users

Enterprise Users

  • Installation and maintenance subcontractors
  • Gas. electricity and water utilities. public sector. petrochemical
  • Ethernet installation. maintenance and SLA testing

Telco Users

  • Telco. cable TV. broadband. WAN and metro Ethernet plus leased line service providers
  • Mobile network operators
  • Data centres

Test Applications

  • WAN and metro Ethernet access copper and fibre service turn-up
  • Mobile backhaul installation and maintenance
  • Ethernet microwave link
  • Backhaul test for microcell base station and public access WiFi coverage
  • SLA policing
  • Ethernet is everywhere...

Test Functions

  • One touch to run multiple tests – unattended
  • Y.1564 (NetSAM) and RFC2544
  • SLA-Tick (Service Level Agreement) and BERT
  • Multi service (stream) test
  • Simultaneous IPv4 and IPv6 support
  • QinQ. Multiple VLAN and MPLS

 

 

Which UniPRO model is right for you?

  • UniPRO MGig1
    R152001
    - GbE transmission tester with single copper port (Solo)
    R152008 - GbE transmission tester with dual copper ports (Duo)
     
    Entry level model for first line users. Ideal for radio link installers. fixed link installers. subcontractors. network maintenance professionals and system integrators.
     
    UniPRO MGig1 PLUS
    R152002
    - GbE Multi stream Bi-Directional transmission tester with single copper and
    optical ports (Solo)
    R152009 - GbE Multi stream Bi-Directional transmission tester with dual copper and
    optical ports (Duo)
     
    Ideal for skilled engineers who want the ability to augment pre-configured and auto sequence tests with the ability to dig deeper into the troubleshooting of unsatisfactory test results - or who wish to do detailed manual testing.
     
    UniPRO MGig1 PRO
    R152003
    - GbE Multi stream Bi-Directional transmission tester with single copper and optical ports. MPLS and Y.1564 (Solo)
    R152010 - GbE Multi stream Bi-Directional transmission tester with dual copper and optical ports. MPLS and Y.1564 (Duo)
     
    Full ITU-T Y.1564 (NetSAM) multi service (stream) testing capability. Retains the simplicity of use. intuitive graphic interface and time saving pre-configured and single button auto sequence testing functions. Adds the independent target and service to cut troubleshooting time.
     
    UniPRO SEL1
    R154000
    - GbE loopback device with single copper and optical ports
     
    A self contained intelligent loopback device to accompany any of the UniPRO MGig1 units to enable loopback at the distant end of the link.
     
    Single or multiple UniPRO SEL1s can be fully remote controlled by the near end UniPRO MGig1 including the download of all the necessary operating parameters. Other than plugging it into the demarcation point at the far end. no further human intervention is needed.
     
    It can also be used as a manually controlled loopback unit for other manufacturers’ Ethernet testers.
     
    UniPRO SEL1 can be permanently connected to a spare switch port to enable unmanned loopback testing for network troubleshooting. The link under test is simply bridged to the UniPRO SEL1’s port using the switch’s remote management commands.
Product Details
41-Standard Manufacturer Warranty 1 YEAR
132-Package includes 1 NiMH battery pack, 2 30cm RJ45 STP cables, 1 power supply, carrying hardcase, user manual on CD-ROM, quick guide
35-Dimension (HxWxD) (mm) nc
13-Net Weight nc
Download Files
By continuing browsing, you accept the use of cookies to offer you services and offers tailored to your interests, and measure the use of our services. Learn more about cookies.
I accept