Ideal Networks | UniPRO MGig 1 PRO

Ethernet traffic tester, RJ45 & optic fiber, WAN & Metro, MPLS, Y.1564 (NetSAM)

Ideal Networks
Reference : IDNUniProMGig1Pro
Serie : UniPRO
Purchase Order Reference : UniPro MGig1 Pro
Brand : Ideal Networks
Testeur de traffic Ethernet, interface cuivre RJ45 & optique via SFP.
Avec MPLS et Y.1564 (NetSAM).
2 versions disponibles: mono ou bi-ports (soit 1 RJ45 + 1 optique ou 2 RJ45 + 2 optiques) (voir les options). 

Compatibilité intégrale pour le test multi-service selon la norme ITU-T Y.1564 (NetSAM).
Offre une grande simplicité d'utilisation, une interface graphique intuitive ainsi quun bouton Autotest.
Il est facile à configurer et dispose de pré-réglages permettant d'économiser du temps.
Propose de paramétrer indépendamment les cibles et les services pour réduire la durée de lintervention. 

Options supplémentaires par rapport à l'UniPRO MGig1 PLUS: 
  • Test depuis une seule extrémité selon Y.1564 (NetSAM) 
  • Test bidirectionnel selon Y.1564 (NetSAM) 
  • Test MPLS, jusqu'à trois niveaux. 
  • Huit services simultanés (flux) sous test, lors des tests Y.1564 (NetSAM)
    Expédié sous 2 semaines
    Quick quote for this product
    Quick quote for this product

    UniPRO MGig1
    Carrier-grade Ethernet tester

    UniPRO SEL1
    Intelligent loopback device

    Designed for full Ethernet testing of carrier service turn-up. mobile backhaul link. microwave and wireless link and for enterprise users to monitor carriers’ SLA performance

    Typical Users

    Enterprise Users

    • Installation and maintenance subcontractors
    • Gas. electricity and water utilities. public sector. petrochemical
    • Ethernet installation. maintenance and SLA testing

    Telco Users

    • Telco. cable TV. broadband. WAN and metro Ethernet plus leased line service providers
    • Mobile network operators
    • Data centres

    Test Applications

    • WAN and metro Ethernet access copper and fibre service turn-up
    • Mobile backhaul installation and maintenance
    • Ethernet microwave link
    • Backhaul test for microcell base station and public access WiFi coverage
    • SLA policing
    • Ethernet is everywhere...

    Test Functions

    • One touch to run multiple tests – unattended
    • Y.1564 (NetSAM) and RFC2544
    • SLA-Tick (Service Level Agreement) and BERT
    • Multi service (stream) test
    • Simultaneous IPv4 and IPv6 support
    • QinQ. Multiple VLAN and MPLS



    Which UniPRO model is right for you?

    • UniPRO MGig1
      - GbE transmission tester with single copper port (Solo)
      R152008 - GbE transmission tester with dual copper ports (Duo)
      Entry level model for first line users. Ideal for radio link installers. fixed link installers. subcontractors. network maintenance professionals and system integrators.
      UniPRO MGig1 PLUS
      - GbE Multi stream Bi-Directional transmission tester with single copper and
      optical ports (Solo)
      R152009 - GbE Multi stream Bi-Directional transmission tester with dual copper and
      optical ports (Duo)
      Ideal for skilled engineers who want the ability to augment pre-configured and auto sequence tests with the ability to dig deeper into the troubleshooting of unsatisfactory test results - or who wish to do detailed manual testing.
      UniPRO MGig1 PRO
      - GbE Multi stream Bi-Directional transmission tester with single copper and optical ports. MPLS and Y.1564 (Solo)
      R152010 - GbE Multi stream Bi-Directional transmission tester with dual copper and optical ports. MPLS and Y.1564 (Duo)
      Full ITU-T Y.1564 (NetSAM) multi service (stream) testing capability. Retains the simplicity of use. intuitive graphic interface and time saving pre-configured and single button auto sequence testing functions. Adds the independent target and service to cut troubleshooting time.
      UniPRO SEL1
      - GbE loopback device with single copper and optical ports
      A self contained intelligent loopback device to accompany any of the UniPRO MGig1 units to enable loopback at the distant end of the link.
      Single or multiple UniPRO SEL1s can be fully remote controlled by the near end UniPRO MGig1 including the download of all the necessary operating parameters. Other than plugging it into the demarcation point at the far end. no further human intervention is needed.
      It can also be used as a manually controlled loopback unit for other manufacturers’ Ethernet testers.
      UniPRO SEL1 can be permanently connected to a spare switch port to enable unmanned loopback testing for network troubleshooting. The link under test is simply bridged to the UniPRO SEL1’s port using the switch’s remote management commands.
    Product Details
    41-Standard Manufacturer Warranty 1 YEAR
    36-Additional Characteristics RJ45 & Optic (via SFP) interfacesBi-Directional testingMulti service (stream) SLA-Tick testingMPLS testingY.1564 (NetSAM) testing
    132-Package includes 1 NiMH battery pack, 2 30cm RJ45 STP cables, 1 power supply, carrying hardcase, user manual on CD-ROM, quick guide
    35-Dimension (HxWxD) (mm) nc
    13-Net Weight nc
    Download Files
    By continuing browsing, you accept the use of cookies to offer you services and offers tailored to your interests, and measure the use of our services. Learn more about cookies.
    I accept