Dent Instruments | CT-HMC-0200
200A Mini hinged CT
Courant nominal : 200A
gamme : de 1 à 300A
sortie : 333 mV @ 200A AC
diamètre d'enserrage : 25mm
Connectique de sortie au choix:
- Connecteurs/embouts bananes 4mm (pour connexion à un appareil de mesure (mutlimètre...) autre que Dent)
- Fils nus sertis (pour connexion direct aux analyseurs Dent (Elite Pro, powerscout...))
KEY SPECIFICATIONS
Window Size ................. 1” (25 mm)
Current Range* .................1 ‐ 300 AC
Output ..............................333 mV @ 200 A AC (i.e. 1.67 mV/A AC)
Ratio Error** .....................<1% from 1 to 300A AC (typical)
Phase Error ......................<0.5° from 1 to 300A AC
* Depending on meter compatibility. See ELITEpro™ and PowerScout™ specifications for details.
** For maximum performance. keep CT contact surfaces wiped clean and free of debris
ELECTRICAL
Output ........................................333 mV @ 200 A
Wire Polarity ...............................White = Hi. positive (+) Black = Low. negative (-)
Phasing ...................................... Arrow On Case Points
Orientation...................................Toward Load
Frequency Range .......................50 to 400 Hz
MECHANICAL
Case Material White Nylon. UL 94 V‐0
Leads 2.4 M (8’). 600V. 22 gage
Working Temperature ‐15 to 60°C (5 to 140°F)
SAFETY
Working Voltage 600 VAC. Category III
Dielectric Strength 5200 VAC for 1 minute
105-Max measure current (A) | 300A |
428-Jaw opening | 25mm |
520-Sensor type | Classic, Hall effect |
118-Output type (V/C) | Voltage |
149-Probe accuracy (%) | 1% |
117-Current measurement type (AC/DC) | AC |
119-Safety Level | CAT III |
120-Safety Overvoltage | 5200VAC during 1min |
35-Dimension (HxWxD) (mm) | 70x47x51mm |
- Brochures
- Support