Fluke | 190-102

2 channels 100 MHz scopemeter, 1.25 Gs/s, color display, Connect-and-View™

Reference : FLU190-102
Serie : 190 II
Brand : Fluke
Scopemeter 2 voies isolées.
Fonction Connect-and-View™ (mesures automatiques).
Bande passante: 100MHz.
Fréquence d'échantillonnage: 1.25 Gech/s par voie.
Profondeur mémoire: 30kpts.
Sensibilité verticale: 2mV/div à 100V/div.
Sécurité: 1000V CAT III, 600V CAT IV.
Fournis avec 2 sondes passives.
Expédié sous 2 semaines
Quick quote for this product
Quick quote for this product

Fluke ScopeMeter 190 Series II

Fluke 190 Series II Scopemeter® Go Where Scopes Could Never Go Before.

As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V. the new Fluke ScopeMeter® 190 Series II combines an unprecedented level of performance. ruggedness. and portability. You can choose from 60MHz. 100MHz or 200MHz bandwidth models. both with real-time sampling rates up to 2.5 GS/s and 400 ps resolution to capture noise and other disturbances. Both models feature deep memory—up to 10.000 samples per channel— so you can examine very small parts of the waveform in detail. And both are IP-51 rated to withstand dust. drips. humidity. and wide temperature variations. Fluke ScopeMeter test tools are hand-held battery operated. designed to meet the demands of field service professionals.

See More. Fix More with the New Two and Four-Channel CAT IV Rated Fluke ScopeMeter 190 Series II

The new Fluke ScopeMeter 190 Series II combine the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians. these tough ScopeMeter test tools go into harsh. dirty. and hazardous industrial conditions to test everything from microelectronics to power electronics applications.

The new 190 Series II is the one test tool you will reach for to tackle just about any troubleshooting task. They include a multimeter. TrendPlot™ and ScopeRecord™ roll paperless recorder modes and hands free operation with Connect-and-View™ triggering. and much more:

  • Two or four electrically isolated inputs
  • CAT III 1000V / CAT IV 600V safety rated
  • Choose from 60 MHz. 100MHz or 200MHz bandwidth models
  • Fast sampling rate. up to 2.5GS/s with up to 400 ps resolution
  • Deep memory: 10.000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter in 2 Channel models
  • Quad meter measurements via scope BNC inputs in 4 channel models
  • Connect-and-View continuous auto-trigger. single shot. pulse width. and video triggering
  • ScopeRecord roll mode. capture waveform sample data for up to 48 hours
  • TrendPlot. trend measurement readings for up to 22 days
  • Advanced automatic measurements. power (Vpwm. VA. W. PF) and time (mAs. V/s. w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan
    • 190-X04. 4 Channel models up to 7 hour (BP291 included standard)
    • 190-XX2. 2 Channel models up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
    • Charge spare battery using optional external battery charger EBC290
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock

Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating

The new Fluke ScopeMeter 190 Series II portable scopes are double-insulated four-channel floating oscilloscopes safety rated for measurements in CAT III 1000V/CAT IV 600V environments.

Three-dimensional testing for industrial systems

Inspect input signals. output feedback loops or safety interlocks simultaneously to find a range of problems including:
  • Circuit voltage/current overloading
  • Signal timing measurements and synchronization issues
  • Attenuation/input impedance mismatch
  • Signal fluctuation/drift

Three-phase testing for diagnosing VSD. power inverters. and converters

Take advantage of four channels to test variable frequency drive and inverter power electronics technology used in wind energy and transportation applications:
  • Test for harmonics. transients and loads in three-phase power input
  • Troubleshoot dc to ac converters for faulty IGBT gates.
  • Test PWM output for reflections and transients

Safely measure from mV to kV

Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

Take on the Harshest Conditions with the only IP-51-rated Scope on the Market

Rugged and shock-proof. all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust. water vapor. drips. humidity and airborne pollutants. ensuring reliable accurate performance every time you need them.

Built in multimeter to quickly and conveniently perform precise measurements.

Built-in digital multimeter 190 Series II 2 channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include Vdc. Vac. Vac+dc. resistance. continuity and diode test. Measure current and temperature using suitable shunt. probe or adapter with wide range of scaling factors. The Fluke-190-X04. 4 channel models incorporate quad meter measurements via the 4 channel scope BNC inputs.  

Work a Full Shift on a Single Charge

New high-performance batteries take advantage of Li-ion technology to keep you going strong for eight hours. And with the easy-access battery door you can make battery swaps fast.

Capture and Share Waveforms Easily with New USB connectivity

Two USP ports. electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform. screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.

See a Stable Display Instantly with Connect-and-View™ Triggering

Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button. you get a stable. reliable. and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.

Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™

ScopeRecord memory stores up to 30.000 data points per channel. capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)
  • Stores events like motion profiles. UPS. power supply. and motor start-ups
  • With the Stop-on-Trigger mode. the ScopeMeter automatically recognizes a power failure and stores the waveform data preceding it
  • With the waveform zoom (up to 100x) you can look at the smallest details. like individual power cycles

Record up to 16 days with TrendPlot™ paperless recorder to find intermittent faults

Intermittent faults can be caused by bad connections. dust. dirt. corrosion. or simply broken wiring or connectors. Line outages. sags. or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter helps find those faults by:
  • Plotting minimum and maximum peak values and average over time up to 16 days
  • Plotting any combination of voltages. amps. temperature. frequency and phase for all four inputs. all with time and date stamp to pinpoint faults



Fluke 190-204: 200 MHz
Fluke 190-202: 200 MHz
Fluke 190-104: 100 MHz
Fluke 190-102: 100 MHz
Fluke 190-062: 60 MHz

Number of Channels

Fluke 190-204: 200 MHz: 4 channels
Fluke 190-202: 200 MHz: 2 channels
Fluke 190-104: 100 MHz: 4 channels
Fluke 190-102: 100 MHz: 2 channels
Fluke 190-062: 60 MHz: 2 channels

Real-time sample rate

Fluke 190-204: 2.5 GS/s
Fluke 190-202: 2.5 GS/s
Fluke 190-104: 1.25 GS/s
Fluke 190-102: 1.25 GS/s
Fluke 190-062: 625 MS/s


4 scope or 2 scope plus DMM input

Independently floating isolated inputs

Up to 1000 V CAT III/600 V CAT IV between inputs. references and ground

Timebase range

2 ns - 2 min/div (190-20X. 200 MHz models)

5 ns - 2 min/div (190-10X. 100 MHz models)

10 ns - 2 min/div (190-062. 60 MHz model)

Input sensitivity

2 mV-100 V/div

Trigger types

Connect-and-View™. Free Run. Single Shot. Edge. Delay. Dual Slope. Video. Video Line. Selectable pulse width. N-Cycle

Trigger Source

Any scope input channel. or external via DMM input on 190-XX2. 2 channel models

Glitch capture

8 ns

Scope measurements

Cursor: 7
Automatic: 30

Maximum record length

ScopeRecord mode: 30.000 pts
Scope mode: 10.000 pts per input


Digital persistence giving analog oscilloscope-like waveform decay

Waveform Compare

Waveform reference with automatic Pass/Fail testing

DMM Specification (2-channel models)

Meter inputs (also used as External Trigger Input for the Oscilloscope Mode)

4 mm banana inputs. fully isolated from scope inputs and from scope ground

Maximum Resolution:

5000 counts


Vdc. Vac rms. Vac+dc rms. Resistance. Continuity. Diode Test. Current (through clamp or shunt). Temperature ºC or ºF (using optional converter)


190-X04. 4 Channel Internal Memory:
Screen + Setup: 15
Recording: 2

190-XX2. 2 Channel Internal Memory:
Screen + Setup: 30
Recording: 10


153 mm full color LCD with fast update rate

Environmental Specifications

Operating Temperature

0ºC to 40ºC Including Batteries

0ºC to 50ºC Excluding Batteries

Storage Temperature

-20°C to +60°C

Operating Altitude

Up to 2.000 m (6666 ft) for CAT IV 600 V. CAT III 1000 V

Up to 3.000 m (10.000 ft) for CAT III 600 V. CAT II 1000 V

Safety Specifications

Electrical Safety

1.000V CAT III/600V CAT IV (EN61010-1)

Mechanical & General Specifications


270 x 190 x 70 mm


2.2 kg


3-years on main instrument. 1-year on accessories

Li-Ion Battery

190-X04. 4 Channel models: BP291 4800 mAh battery up to 7 Hours included standard

190-XX2. 2 Channel models: BP290 2400 mAh battery up to 4 hours included standard. Up to 8 hours using optional BP291

Included Accessories

Two channel models

VPS410 Voltage Probe Sets (one red. one blue)
TL175 TwistGuard™ safety designed Test Lead Set (red and black)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
Handstrap (affixed to instrument)
Multi-Language User Manuals on CD-Rom
FlukeView ScopeMeter demo package (restricted functionality)
USB Interface Cable

Four channel models

VPS410 Voltage Probe Sets (one red. one blue. one grey. one green)
BC190 Battery Charger/mains Adapter
BP291 4800 mAh high capacity Li-ion Battery
Handstrap (affixed to instrument)
Multi-Language User Manuals on CD-Rom
FlukeView ScopeMeter demo package (restricted functionality)
USB Interface Cable


Three years on main instrument. one year on accessories

Product Details
41-Standard Manufacturer Warranty 3 YEARS
3-Number of analog channels 2 Channels
45-PC interface USB
4-Bandwidth (Hz) 100 MHz
10-Min. Vertical Sensitivity (mV/div) 2 mV
11-Max. Vertical Sensitivity (V/div) 100 V
98-Trigger (Type) Edge | Video | Pulse width | Duration
5-Sampling rate (S/s) 1.25 Gsps
7-Vertical Resolution (Bits) 8 Bits
6-Record Length (pts) 30 kpts
18-Signal processing (FFT) Yes
26-Mathematic functions (Y/N) Yes
25-Autonomy 4 hour
120-Safety Overvoltage CAT III 1000V / CAT IV 600V
  • Ecran LCD couleur 153 mm
  • rétro-éclairage par LED
36-Additional Characteristics Connect-and-View™
132-Package includes Li-on battery, 2 passive probes (red, blue) with accessories (hooks, earth connector with mini alligator grips, isolated hand for point...), FlukeView software (limited demonstration version), USB cable, User manual on CD-ROM
35-Dimension (HxWxD) (mm) 270x190x70 mm
13-Net Weight 2.2 kg
Download Files
Items already seen
By continuing browsing, you accept the use of cookies to offer you services and offers tailored to your interests, and measure the use of our services. Learn more about cookies.
I accept