Fluke | 28 II

Handheld robust TRMS multimeter, 1000V/10A AC/DC, IP67

Reference : FLU28II
Serie : 27 II, 28 II, 27II, 28II
Purchase Order Reference : FLUKE-28II/EUR (3947820)
Brand : Fluke
Multimètre indutriel.
Tension et courant à mesure TRMS.
Tension: 1000V AC/DC.
Courant: 10A AC/DC.
Bande passante: 15 Hz - 20 kHz.
Résistance, continuité, test de diode, température, crête min-max.
Enregistrement min/max, moyenne.
Filtre passe-bas.
En Stock
Quick quote for this product
Quick quote for this product
 Fluke 27 II/28 II
Industrial Multimeters

The NEW standard for rugged

The NEW Fluke 27 II and 28 II digital multimeters define a new standardfor operating in harsh conditions with the features and accuracy totroubleshoot most electrical problems.
Both meters have IP 67(waterproof and dustproof) rating. MSHA approvals (pending). extendedoperating temperature range of -15 °C to +55 °C (5 °F to 131 °F. -40 °Cfor up to 20 minutes) and 95 % humidity. and have been designed andtested to withstand a 3 m (10 ft) drop.
The new Fluke 20 SeriesMultimeters are built to work in the toughest environments.

  • Measure up to 1000 V ac and dc
  • Measure up to 10 A (20 A for 30 seconds)
  • 10.000 μF capacitance range
  • Frequency to 200 kHz
  • Extended ac voltage bandwidth– 15 Hz to 20 kHz (28 II). 40 Hz to 30 kHz (27 II)
  • Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (28 II)
  • Resistance. continuity and diode test
  • Min/Max and average recording to capture variations automatically
  • Peak min-max (28 II)
  • Uniquefunction for accurate voltage and frequency measurements on adjustablespeed motor drives and other electrically noisy equipment (28 II)
  • New – IP 67 waterproof & dustproof protection. completely sealed for use in harsh environments
  • Designed to withstand 3 meter drop (with holster)
  • Hi resolution 20.000 count display mode (28 II)
  • True-rms ac voltage and current for accurate measurements on non linear signals (28 II)
  • Average responding voltage and current for measurements (27 II)
  • New – Backlit keypad buttons allow for easy visibility in lowlit areas
  • Large display digits and 2 level bright white backlight for increased visibility
  • Reversible holster for added protection when not in use
  • Withstandshazardous 8.000 volt spikes caused by load switching and faults onindustrial circuits and complies with second edition IEC and ANSIelectrical safety standards
  • Long battery life (800 hours)
  • Relative mode to remove test lead resistance from low ohms measurements
  • Auto and manual ranging for maximum flexibility
  • Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
  • MSHA approval (pending)
Accuracy specifications
DC voltage
Range 0.1 mV to 1000 V
Accuracy 27-II:0.1 % +1
28-II:0.05 % + 1
AC voltage
Range 0.1 mV to 1000 V
Accuracy 27-II: 0.5 % +3
28-II: 0.7 % +4
DC current
Range 0.1 μA to 10 A
Accuracy 27-II: 0.2 % + 4
28-II: 0.2 % + 4
AC current
Range 0.1 μA to 10 A
Accuracy 27-II: 1.5 % + 2
28-II: 1.0 % + 2
Range 0.1 Ω to 50 MΩ
Display counts
27-II 6000
28-II 6000/19.999

1 nF to 9999 μF

0.5 Hz to 199.99 kHz

27-II: N/A
28-II: -200 °C to +1090 °C
Low pass filter(Measurement on VSD’s)

27-II: N/A
28-II: Yes

CAT IV 600 V . CAT III 1000V
IP rating
27-II: IP 67
28-II: IP 67

Three AA batteries
Battery life

800 hours

General specifications
Bar graph/backlight Yes/Yes
Data storage
Peak transient capture 250 μS (28 II)
Min/Max/Avg Yes
Reading hold Yes
Other features
Relative readings (zero) Yes
Battery type Three AA batteries
Warranty and protection
Safety rating CAT IV 600 V/CAT III 1000 V
External protection Rubber holster
Drop test 10 feet drop test
Dustproof/waterproof Yes. IP 67 rated
Warranty Limited lifetime
Size (HxWxL) with holster 6.35 cm x 10.0 cm x 19.81 cm(2.5 in x 3.93 in x 7.8 in)
Weight with holster 698.5 g (1.54 lb)

Product Details
41-Standard Manufacturer Warranty Limited LIFETIME
27- Resolution in nb points 6,000 counts
33-additional measurements Resistance | Capacitance | Frequency | Temperature | Continuity test | Diode test | Min/Max | Duty cycle
424-TRMS Yes
435-Data logger on PC No
436-Functions Large display | Backlight | Bargraph | Auto-Hold | Fuse protection
449-Direct input for current probe No
462-Current AC (Alternative) | DC (Continuous)
463-Voltage AC (Alternative) | DC (Continuous)
23-Voltage resolution 0.1 mV
34-Bandwidth 15 Hz - 20kHz
45-PC interface na
24-Accuracy (%) 0.05 %
37-Max. DC voltage 1000V DC
38-Max. AC voltage 1000V AC
25-Autonomy 800 hours
39-Max. DC current 10 A DC
40-Max. AC current 10 A
119-Safety Level CAT I | CAT II | CAT III | CAT IV
120-Safety Overvoltage CAT III 1000V / CAT IV 600V
36-Additional Characteristics Robust.IP67.Low pass filter.
132-Package includes Holster, test leads, alligator clips, manual, CD-ROM, 3 AA batteries
35-Dimension (HxWxD) (mm) 635x100x198.1 mm
13-Net Weight 698.5 g
Download Files
Items already seen
By continuing browsing, you accept the use of cookies to offer you services and offers tailored to your interests, and measure the use of our services. Learn more about cookies.
I accept