Fluke Networks | IntelliTonePRO200LAN
Kit: probe & tone generator, phone line & Ethernet
Identification et diagnostic de la connectivité de liaisons Ethernet 10/100/ 1,000 Mbit/s et indication carte réseau/concentrateur.
Identification et diagnostic des services téléphoniques de base avec détection du service et de la polarité d'une seconde ligne.
Vérification des installations à paires torsadées avec la fonction de validation de schéma de câblage qui identifie les défauts de câblage les plus fréquents.
Localise, isole et valide les câbles à paires torsadées (UTP, Cat 5e, Cat 6), les câbles coaxiaux (RG6, RG59 et autres câbles de télévision CATV/CCTV), fils nus (tels que les fils de haut-parleur et les fils des réseaux de sécurité) et les fils téléphoniques Cat 3.
Le toner permet en outre de valider les services voix et données.
IntelliTone™ Pro 200 LAN Toner and Probe
Digital network cable toner and probe traces and locates cables on active network.
IntelliTone digital toning technology:
- Ends cable location confusion. decisively rejects noise and false signals
- Locates cables on active networks. even when terminated at a switch
- Isolates cable and wiring within a bundle. despite cable bleed
- Confirms cable location. verifies continuity. and detects faults (opens. shorts. and reversed pairs) in one step
SmartTone® analog toning technology:
- Isolates individual wire pairs precisely by changing tone when shorted
- Effectively traces and locates voice. audio. and video cabling
Get advanced vision for locating network cables more effectively at patch panels. switches. termination blocks. or hidden within bundles. Our new IntelliTone Pro 200 LAN Toner and Probe Kits finds the cables others can't.
The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs. and trace voice. audio. and video cabling.
The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors. ceilings. walls. and in bundles. This network cable toner and probe's breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
Only IntelliTone™ Pro Toners and Probes offer the powerful combination of digital and analog technologies to resolve common infrastructure problems that arise during installing. maintaining. and changing of your network.
Digital and analog toning in one tool.
Today’s media networks are more diverse than ever. Most buildings have a combination of telephone. twisted-pair data. coax. and security/alarm wiring. Verifying proper routing and termination of this diverse set of cabling types requires tools optimized for different frequencies. connector types. and work environments. Until now. no single tool has combined the right technologies to operate across all copper media types. and in all environments. IntelliTone Pro changes that by combining cutting-edge digital and analog signaling to locate and verify virtually any copper cable. regardless of application or environment.
When to use digital
IntelliTone Pro’s digital encoded signal should primarily be used on high-grade data cabling (Cat 5e/6/6a). and in active network environments. It operates at a high-frequency to match the higher frequency data the cable plant is designed to carry. This allows the tone to overcome competing data signals and aggressive low-frequency terminations of Ethernet switches. That means LAN cabling technicians can quickly zero in on the right cable during installations or troubleshooting.
Digital toning is especially helpful once the cable has been located as it displays cable wiremap and checks for shorts. opens and miswires. The IntelliTone Pro 200 probe has an RJ45 input port and CableMap feature. allowing it to be plugged directly into a patch panel or wall port. The benefit of this wiremap test is two-fold. It eliminates the need for both a toner to a wiremapper. and provides 100% confirmation that the right cable has been located.
When to use analog
IntelliTone Pro’s SmartTone analog toning can be used on voice-grade cabling (Cat 3 and below). as well as coax. security/alarm. and speaker wiring. These cables are optimized for lower frequency transmissions. and therefore are more easily isolated with a low-frequency tone. It should also be used in areas with relatively low interference from electronic devices. In high-interference environments. digital may still be a better choice.
SmartTone analog toning eliminates frustrating guesswork locating individual wire pairs during installations. The SmartTone analog signal will change ‘songs’ each time the pair under test is shorted together. This provides telecom technicians a decisive way to identify individual wire pairs before punching them down on a jack or a block. or when diagnosing voice transmission problems.
|MT-8200-60-KIT||IntelliTone Pro 200 LAN Toner and Probe Kit Includes: IntelliTone 200 LAN Toner and 200 Probe. coax F connector adapter. (2) RJ11 and (2) RJ45 patch cables. test leads with alligator clips. (2) lanyards. quick start guide. and (2) 9-volt batteries|
|MT-8200-61-TNR||IntelliTone Pro 200 LAN Toner Includes: IntelliTone Pro 200 LAN Toner. coax F connector adapter. RJ11 and RJ45 patch cables. test leads with alligator clips. lanyard. quick start guide. and 9-volt battery|
|MT-8200-63A||IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe. RJ11 and RJ45 patch cables. lanyard. quick start guide. and 9-volt battery|
|MT-8202-05||IntelliTone Case Heavy-duty pack cloth padded and lined case with belt loops and d-ring|
|MT-8203-20||Test Leads with Bed of Nails Set of two Banana Jack test leads with piercing pin 'Bed of Nails' alligator clips with vinyl sleeves|
|MT-8203-22||Test Leads with Alligator Clips Set of two Banana Jack test leads with standard alligator clips with vinyl sleeves|
|41-Standard Manufacturer Warranty||1 YEAR|
|354-Tone frequency|| |
|355-Tone power||5V p-p|
|356-Voltage amplification (probe)||nc|
|357-Input impedance (probe)||nc|
|36-Additional Characteristics||Digital and analogtoning and detection.Verify Ethernet service.CABLEMAP function that identifies common cable miswires in twisted pair cabling.Identify telecom service.|
|132-Package includes||coax F connector adapter, two RJ11 and two RJ45 patch cables, test leads with alligator clips, lanyards, owners CD and quick start guide, two 9 volt batteries|
|35-Dimension (HxWxD) (mm)||Tone generator:141x75x32 mm.Amplifier probe:222x48x32 mm.|