Fluke Networks | TS100

Defaults cable detector with BNC alligator clip, FT units

Fluke Networks
Reference : FLNTS100
Purchase Order Reference : 26500000
Brand : Fluke Networks
Dépanneur de câbles.
Détecteur de défauts, générateur de tonalité, mesureur de longueur de câbles.
Identifie les coupures et courts-circuits, mesure la distance jusqu'aux défauts (Sur tous types de paires de câbles à 2 conducteurs en partant d'une seule extrémité jusqu'à 914 mètres), mesure en continu, mesure la longueur des câbles sur les bobines.
Cordon interchangeable.
Modèle avec unités en Pieds (FT).
En Stock
Quick quote for this product
Quick quote for this product

TS®100 Cable Fault Finder

An easy-to-use fault locator. cable and wire manager and tone generator.
TS100 Cable Fault Finder


At a Glance

  • Works on any two or more conductor cable up to 3.000 feet (915 meters)
  • Instantly measures distance to open or any fault from one end of any cable pair
  • Patented SmartTone™ tone generator positively identifies pair
  • Measures cable distance on spool
  • Measures constantly while "On"
  • Displays distance reading rather than waveform
  • Large bright LED screen
  • One button operation
  • High voltage detection
  • Moisture proof
  • Additional line cord options available for coaxial cable (F-connectors) and other applications

Product Capabilities
This easy-to-use. competitively priced tester is three tools in one -- a fault locator. a cable & wire manager and a tone generator with SmartTone™ technology. From just ONE END of any two or more conductor cable you can measure up to 3.000 feet (915 meters). Easily find the distance to opens or shorts on electrical wire. telephone wire. security wire and coax. Results appear as a distance reading rather than a waveform. so it's perfect for technicians unfamiliar with Time Domain Reflectometery (TDR). Find and fix cable problems without pulling new wire or blindly cutting into walls. Intermittent faults are easier to find because the unit constantly measures while "On".

It's perfect for inventory management of cable stock in trucks and warehouses and it can help you generate more accurate bids for jobs by quickly assessing needs and managing the cable stock with greater accuracy. Patented SmartTone technology gives you 5 distinct tones to use for exact wire and pair identification. even in proximity to current-bearing cable. When touching the wires together and momentarily shorting the far end of a cable pair. the SmartTone technology will change the cadence of the tone generated.  This tone change you hear through the probe positively verifies the correct wire pair. Voltage detection in the unit will immediately sound an alarm if you accidentally clip onto an energized pair. up to 250VAC.



4 AA alkaline batteries. provide 50 hours of operation.

Reverse Battery Protection

No damage to the tester will occur if the batteries are installed backwards.

Input Protection

250 V rms ac. continuous or intermittent


If the tester is exposed to water. some may get inside. but it will suffer NO DAMAGE. See the information on moisture under “Maintenance”.

Impedance Range

35 Ω to 330 Ω with auto-compensation within this range. Cables with an impedance outside this range will not be properly tested and may produce erratic or incorrect readings.

Maximum Length

2500 feet on certain cable types. 2000 feet on most cable types. and 500 feet on very lossy cables. The tester will display –Err if the cable is too long to be correctly measured.

Representative Maximum Cable Length

2500 feet: CAT-5 Twisted Pair 2000 feet: 12/2 ac Wire 1000 feet: RG-6/U TV Coax 500 feet: RG-174/U Coax

Minimum Length

No minimum length Minimum non-zero reading is 2 feet

Length Accuracy

±2 feet for cables less than 10 feet ±5 feet for cables longer than 10 feet and shorter than 200 feet ±3 % and ±5 feet for cables longer than 200 feet

High Voltage Detection

An ac voltage of more than 5 V rms will trigger the High Voltage Warning.

Measurement Rate

Maximum of 4 complete measurements per second. decreasing to 2 seconds per measurement based on cable size and uniformity.


Adjustable from -20- to -99-. retained during power off. Default to -66- when batteries are changed

Measurement Technology

Time Domain Reflectometry (TDR) with 50 Ω drive impedance. 6 V maximum pulse height

Low Battery

Indicator flashes when battery voltage falls below 4.1 V

Tone Injection

Approximately 1 kHz at an amplitude of 80 % of battery voltage. Variable frequency and cadence. Tone characteristic is changed as cable condition changes to “normal-open” from any other condition.

Cable Type

Virtually all two or more conductor cables

Temperature Range

Operating Storage

32 °F to 131 °F (0 °C to 55 °C) -40 °F to 158 °F (-40 °C to 70°C)



0 % to 80 %


0 % to 100 %


1 lb

Certifications and Compliance

Conformité Européenne. Conforms to relevant European Union directives. CAN/CSA-C22.2 No. 60950-1-03 CAN/CSA-C22.2 No. 1010.1-92 CSA-C22.2 No. 1010.1B-97. UL/ANSI 3111-1


Product Details
41-Standard Manufacturer Warranty 1 YEAR
36-Additional Characteristics Feet units (FT)
132-Package includes 4 AA batteries, pouch with belt clip
35-Dimension (HxWxD) (mm) 188x38x70 mm
13-Net Weight 453 g
Items already seen
By continuing browsing, you accept the use of cookies to offer you services and offers tailored to your interests, and measure the use of our services. Learn more about cookies.
I accept