Fluke | T90
VAT voltage and continuity tester, 12-690V, 65Hz
Mesure de la tension
Gamme de mesure: 12-690V AC/DC.
Mesure de la continuité avec indication visuelle et sonore
Affichage à DELs
Test unipolaire pour la détection de phase
Indicateur de polarité
L'affichage de la tension fonctionne aussi lorsque les piles sont plates, voire sans piles (VAT).
Conforme EN 61243-3:2010.
EN 61243-3: 2010
Voltage and Continuity Testers
CAT IV 600 V. CAT III 690 V safety rating.
Fluke’s new family of two-pole testers comply with both regulation HSE GS 38 (tip caps) and IEC EN 61243-3: 2010. the most recent and applicable standards for this type of test equipment.
Vibration provides tactile feedback (T110. T130. T150).
Even when viewing the display or hearing the beeper is difficult. you’ll know voltage is present. This is especially useful in noisy environments. or when you can’t take your eyes off the probes.
Audio on/off for testing in quiet areas.
If you’re working in quiet surroundings. such as a medical or office setting. you don’t want to disturb people in the vicinity with noises.
The tester’s acoustic alert switches on or off to fit your environment.
Detects voltage even with discharged batteries.
The tester can still detect the presence of voltage (>50 V ac. >120 V dc) even with dead batteries. an important safety feature.
You should always use your two-pole tester with working batteries. but for that rare time when your batteries fail in the field. it’s nice to know you still have this one indication of live voltage.
Phase rotation indicator for 3-phase systems.
Where three-phase power supplies feed motors. drives and electrical systems. use Fluke’s innovative three-phase rotation detection system to quickly determine phase sequence.
Ensure the system is wired correctly. without reaching for another tool.
Convenient two-button controls allow you to draw more current from the circuit under test and intentionally trip Residual-Current Devices (RCDs) remotely and determine if they are wired correctly. A Quick Start Guide covering the basics of RCD testing is included with the product.
Built in electric torch (T110. T130. T150).
Light up dim testing environments at the touch of a button for faster. safer probing.
Single-phase voltage offers fast identification of live conductors.
Need to verify that a row of “hot” conductors are indeed connected to power? The two-pole tester can tell with you a single touch of the main probe. Simply touch a live conductor and the probe instantly give an audible and visual signal if the power is on. A great timesaver before you begin actual testing.
Resistance testing (T150).
Testers measure and display resistance up to 1999 ohms. adding more power and versatility to this essential tester.
WearGuard™ insulation shows damage to test leads.
The two-pole tester’s rugged. durable test leads have two layers of insulation for added durability. But if the inner. contrasting-colored
layer is showing. that’s a sign that the test leads have been damaged and replacement is in order.
|Backlit LED indicator||o||o||o||o|
|Backlit LCD digital display||-||-||LCD||LCD|
|Continuity test—visual results||o||o||o||o|
|Continuity test—audible results||o||o|
|Indication of polarity||o||o||o||o|
|Single pole test for phase detection||o||o||o||o|
|Rotary field indicator||-||o||o||o|
|Probe tip protection||o||o||o||o|
|Voltage display with discharged batteries||o||o||o||o|
|Electrical torch function||-||o||o||o|
|Wear indicator test lead wire||o||o||o||o|
|Voltage ac/dc||12 V to 690 V||6 V to 690 V|
|Continuity||0 to 400 kΩ|
|Frequency||0/40 to 400 Hz|
|Phase rotation||-||100 V to 690 V|
|Resistance measurement||-||-||-||Up to 1999 Ω|
|Response time (LED indicator)||< 0.5 s|
|200 kΩ input impedance||Current draw 3.5 mA @ 690 V; 1.15 mA @ 230 V|
|7 kΩ input impedance|
(with load buttons pressed)
|-||Current draw 30 mA @ 230 V|
|Safety rating||CAT II 690 V|
CAT III 600 V
|CAT III 690 V. CAT IV 600 V|
|41-Standard Manufacturer Warranty||2 YEARS|
|452-AC voltage max. (V)||690 V AC|
|757-NF C 18-510||No|
|454-AC voltage min. (V)||12 V AC|
|453-DC voltage max. (V)||690 V DC|
|455-DC voltage min. (V)||12 V DC|
|95-VAT (IEC/EN 61243-3)||Yes|
|692-IP2X touch points (IEC/EN 60529)||No|
|93-Functions||Continuity | Polarity | Phase test (1-pole) | Audible Beep|
|119-Safety Level||CAT I | CAT II | CAT III|
|120-Safety Overvoltage||CAT II 690V / CAT III 600V|
|132-Package includes||T90, 2x 1.5V batteries, instructions sheet, manual|
|35-Dimension (HxWxD) (mm)||230x65x38 mm|
|13-Net Weight||180 g|