JDSU-VIAVI | Tri-Porter
Cables tester, Triple-Play (Voice, Data, Video), and phone tester
Destockage -> 1 seul à ce prix !!
Testeur de câblage.
Solution de test Triple Play: teste le câblage physique voix, données et vidéo.
Réalise les opérations de 6 instruments de mesure: testeur de téléphone, testeur de réseau, générateur de tonalité, testeur/vérificateur de câbles, dépisteur de tonalité, et Coax Mapper.
Mesure de la longueur de câble: 457m max.
Tri-Porter™ Premises Wiring Tester for Voice. Data & Video
The Tri-Porter™ Premises Wiring Tester enables a full range of premises cabling tests with a single tool. It provides full diagnostic capability for network. telephone. and video systems with wiring qualification and fault diagnosis. cable tracing. location identification. and presence of service detection. Tri-Porter consists of a main unit and cable test remote/probe that enables technicians to test. troubleshoot. and qualify telco. network. and coax cable systems. This all-in-one package performs the work of six traditional testing tools: a DSL-safe telephone test set. active network tester. tone generator. probe. cable tester/verifier. and coax mapper. It also measures basic RF signal level for detection of signal from the cable service provider.
Technicians conduct multiple tests with Tri-Porter. including the following: single-ended continuity test; complete continuity test with cable test remotes; cable trace and location; trace coax cable to device or through splitter; measure cable length; map cable locations; ID unknown jacks or plugs; identify cable termination at active Ethernet ports; ping to verify connectivity to network devices; power premise telephone wiring with dial-tone simulation; provide talk battery; measure basic RF signal level; test telephone circuits for caller ID and other features; and other valuable tests for installation and maintenance of premises networks. regardless of service type.
The easy-to-use Tri-Porter reduces the tool set requirements for technicians with complete functionality for premises cable test and verification. As a result. technicians always have the right tool on hand for the job. In addition. the multifunction tool decreases training requirements and enables technicians to work quickly with one. familiar testing interface.
- Detects and reports speed and capabilities for active Ethernet and other devices up to 1 Gb/s
- Verifies connectivity to active network devices with pinging function
- Blinks link indicator LED to verify cable termination on active ports
- Measures basic RF signal level
- Tests cabling configuration and verifies connectivity
- Identifies location for up to 20 coax. RJ45. RJ11. or unterminated cables at a time
- Measures cable length
- Tones and traces cable through coax splitters
- Includes integrated. DSL-safe. advanced-function telephone test set
- Test and verify drops supporting voice services
- Ensure connectivity to Internet without using a PC
- Check availability of signal from cable service provider
- Configure and test network cable for Ethernet services
- Check capabilities of active network equipment
- Verify wiring condition and connected cable length
- Tone and trace cables for identification and troubleshooting
- Identify cable termination location at drops and active equipment
remote tester/tracer.mini headset. 2x 19 cm RJ12-RJ12 cables (TP20). 2 sacrificial cables for RJ45 mod plug (TP74). 1.22 m RJ11 to angled bed-of-nails cord set (LB35). 2x 30.48 cm RJ45 patch cables (TP55). 30.48 cm coax cable (TG30). shielded F-connector adapter (TG31). 3.05 m safety ground cable (TG32). coupler F-jack to F-jack. set of 20 (1–20) coax ID-only remotes (TP311). set of 20 (1–20) RJ45 ID-only remotes (TP312). set of 20 (1–20) RJ11 ID-only remotes (TP314). set of 20 (1–20) two-lead ID-only remotes (TP315). zippered pouch. manual
|41-Standard Manufacturer Warranty||1 YEAR|
|137-Controls type||CC | CO | Crossing | Separate pairs | Divided pairs | Reversed pairs | Mapping|
|482-Measure of length||Yes|
|141-Max measuring length (m)||457 m|
|136-Cable type||Twisted pairs | RJ45 | RJ11 | Coaxial cable | Shielded cable | RJ12|
|142-Optical fiber test||No|
|36-Additional Characteristics||Triple-Play tester.Phone tester, cable & network tester, tone generator & tracer, Coax Mapper.|
|132-Package includes||remote tester/tracer,mini headset, 2x 19 cm RJ12-RJ12 cables (TP20), 2 sacrificial cables for RJ45 mod plug (TP74), 1.22 m RJ11 to angled bed-of-nails cord set (LB35), 2x 30.48 cm RJ45 patch cables (TP55), 30.48 cm coax cable (TG30), shielded F-connector adapter (TG31), 3.05 m safety ground cable (TG32), coupler F-jack to F-jack, set of 20 (1–20) coax ID-only remotes (TP311), set of 20 (1–20) RJ45 ID-only remotes (TP312), set of 20 (1–20) RJ11 ID-only remotes (TP314), set of 20 (1–20) two-lead ID-only remotes (TP315), zippered pouch, manual|
|35-Dimension (HxWxD) (mm)||200x89x56 mm (Unit)150x58x43 mm (Tracer)|
|13-Net Weight||0.74g (Unit), 0.285 g (Tracer)|