TDK-Lambda Z+ 200W
Alimentations DC programmables simple voie, 200W, jusque 650V et 20A, rackable (option), 2U
Disponible avec branchement en face arrière et/ou face avant (modèles jusqu'à 60V et/ou 24A maximum).
Puissance: 200W.
Tension: 0-10 à 0-650V (selon modèle).
Courant: 0-0.32 à 0-20A (selon modèle).
Sortie face arrière type busbar (jusqu'à 100V) ou bornier (à partir de 160V).
Interfaces RS-232, RS-485 & USB en standard.
Interfaces LAN & GPIB en option.
Interfaces isolées analogiques, 0-10V, 4-20mA en option.
Attention: l'intégration de l'interface GPIB ou d'une interface isolée analogique ou de la face avant change légèremment la dimension de l'alimentation (un peu plus large: passe de 70mm de large (1/6 rack) à 105mm de large (1/4 rack)).
Alimentations utilisables aussi bien sur table qu'en rack (option).
Possibilité d'assemblage multi-alimentations pour obtenir une seule alimentation 2 à 3 voies de table (module Z-NL200 en option) ou jusque 6 voies par rack 19" 2U (module Z-NL100 en option).En mode Rack le chaînage jusqu'à 32 unités est possible.
Z+ series 200W models
Programmable DC Power Supplies
200W in 2U
Built-in USB. RS-232 & RS-485 Interface
Optional Interface:
- LAN
- IEEE488.2 SCPI (GPIB) Multi-Drop
- Isolated Analog Programming
Features Include:
• High Power Density 200W in 2U: 3.5 Inch (89mm) height
• Wide Range Input (85-265Vac continuous)
• Active Power Factor Correction (0.99 typical)
• Output Voltage up to 650V. Current up to 20A
• Constant Voltage (CV)/(CC) Constant Current auto-crossover
• Built-in RS-232/RS-485 Interface Standard
• Global Commands for Serial RS-232/RS-485 Interface
• Auto-Re-Start / Safe-Start: user selectable
• Last-Setting Memory
• High Resolution 16 bit ADCs & DACs
• Low Ripple & Noise
• Front Panel Lock selectable from Front Panel or Software
• Reliable Encoders for Voltage and Current adjustment
• Parallel Operation with Active Current Sharing. for up to six identical units
• Advanced Parallel Master / Slave. Total Current is programmed and measured via the Master
• External Analog Programming and Monitoring (user selectable 0-5V & 0-10V)
• Reliable Modular and SMT Design
• 19” Rack Mount Capability for ATE and OEM applications
• Optional Interfaces
Isolated Analog Programming and Monitoring Interface (0-5V/0-10V & 4-20mA)
IEEE 488.2 SCPI (GPIB) Multi-Drop
LAN
LabView® and LabWindows® drivers
• Arbitrary functions for:
Automotive or laser simulation / 4 Pre-Programmed Functions
• Fast Command Processing Time
• Output Sequencing
• Four-cell Memory Settings
• User Programmable Signal Pins
• Five Year Warranty
• Worldwide Safety Agency Approvals; CE Mark for LVD and EMC regulations
Model | Voltage | Current | Max. power |
Z10-20 | 0-10 V | 0-20 A | 200 W |
Z20-10 | 0-20 V | 0-10 A | 200 W |
Z36-6 | 0-36 V | 0-6 A | 216 W |
Z60-3.5 | 0-60 V | 0-3.5 A | 210 W |
Z100-2 | 0-100 V | 0-2 A | 200 W |
Z160-1.3 | 0-160 V | 0-1.3 A | 208 W |
Z320-0.65 | 0-320 V | 0-0.65 A | 208 W |
Z650-0.32 | 0-650 V | 0-0.32 A | 208 W |
41-Standard Manufacturer Warranty | 5 YEARS |
755-Type - Size | 2U |
68-Max. Power | 200 to 216 W (Depends of model) |
57-Max. output voltage | 10 to 650V (Depends of model) |
58-Max. output current | 0.32 to 20 A (Depends of model) |
56-Channel counts | Single |
717-Programmable | Yes |
501-Programming interfaces | Analog remote control | RS-232 | USB | GPIB |
55-Operating mode (Type) | Independant mode | serie mode | Parallel mode | Master/slave mode |
621-Ripple & noise | 5-60mV RMS, 50-150mV p-p (depend s of model) |
En Stock | No |
36-Additional Characteristics | In standard:- RS-232, RS-485 & USB.- Rear panel output on busbar (for up to 100V models) or female or male connector (for from 160V models).In option:- LAN (LXI compliant) & GPIB interfaces.- Analog 0-10V or 4-20mA interfaces.- 19" 2U rack for Multi-drop mount (Up to 32 units in multi-rack (6 units max per 19" 2U rack)) .- Bench mount module (up to 3 units).- Front panel output on diam4mm connectors (non safety with -L option, standard safety with -L2 option) (for models up to 60V and/or up to 24A only). |
542-Metrology/Quality documentation supplied | Conformity certificate | Calibration certificate (With measures table) |
132-Package includes | AC power cord, conformity certificate, test report with measures table, user manual |
35-Dimension (HxWxD) (mm) | Standard: 83x70x350 mmWide: 83x105x350 mm |
13-Net Weight | 1.9/2.1 kg (Standard); 2.4/2.6 kg (Wide) |
- Brochures- fiches techniques